rotating printing machine
Soft Tube Hard Tube

Best 6 Color Offset Printing Machine for Sale Price

  • Max Speed: 120pcs/minute (Depends on products)
  • Color: 1-8 color, customization
  • Suitable for : Cosmetic tubes, Silicon Sealants, Aluminum Caps, Paper Cups
  • Product Diameter Scope:10~120mm
  • Motor Power: Driving Wheel 3.7kw; Driver for printing plate 2.2kw; driver chain 2.2kw; Driver for ink stick 0.06kw
  • Price: $100,000 whole set header+long oven(the price of header and short oven please contact with sales)

Applications– Sample of Offset Printer for sale

Product dimension:φ16-φ60mm  20-18-mm depend on products
Motor power for Driving wheel3.7KW-1pcs
Motor for printing plate2.2KW–1pcs
Motor for drive chain2.2KW-1pcs
Motor for  driving ink stick0.06KW—6pcs
Cuttingsystemmainmotor 3HP(2.2KW)
Roaster main motor3HP(2.2KW)
Driv emotor90W+90W+90W=270W=0.27KW
UV drying system10KW
Static eliminator system1.5KW
Roaster heating system1.2KW*4=4.8KW
Working air pressure0.4-0.8Mpa
Working voltage380V/420V Can customize any Voltage
External dimensions Printing head :3200*1600*1800mm
weight Printinghead:4000kg
weight Drying oven:3000kg
No Name Remark (maufacturer )
2frequency transformerPanasonic
3Gearimported material
5robot arm systemTHK
8Feeder SystemTHK
10electronic controlOmoron
13voltage protectorFrance
14low-voltage apparatusFrance
15Big WheelCNC
17Mandrel rodsimported material

Offset Printer for sale Video

Contact With Us Immediately

Tel: +86 2166037855
Mobile/What’s app: +86 18019763531


6 color offset printing machine Please read this manual before operating the printing machine!

Ⅰ.Main usage of 6 color offset printing machine:It’s use for 1-6 color(s) printing, glazing and drying of plastic tubes in packing industry.
I will give the best quotation to you at the first time. If there is anything we can do for you, we shall be more than pleased to do so. Hope we can build good cooperation with you. Looking forward to your enquiry!

Features of 6 color offset printing machine:

1) It applies Taiwan-made delicate indexing unit of 180mm centre distance to drive the printing table, so as to guarantee the stability in high speed and the long service life of the indexing unit.

2) Taiwan-made indexing unit and special-made rolling screw mandrel help the process of transferring tubes from printing table to chain.

6 Color Offset Printing Machine - printing head

3) There are only a few cables connecting the printing machine and dryer, it’s convenient to install & future move, also make it possible to place the printing machine downstairs while dryer upstairs, which is space-saving & labor-saving.

4)The dryer applies direct heating method, which reduces heat wastage.

5) Gears of the printing part are processed with precise grinding technique, so as to guarantee their precision and service life, this does help the precision of overprint greatly.

6) The dryer is made up of 2 parts: front part is laminar current & UV treatment, latter part is infrared heating; the gloss is effectual with special laminar current, so as to be less depend on the smoothness of gloss roll surface, and then the gloss roll doesn’t need frequent polishing.
7) Move-back-design of printing table: when tube absent from printing bar, the whole printing table will move back for 5mm, to avoid ink polluting the printing bar.

Operation manual of 6 color offset printing machine

Check before start up

(1) Check the connection between mechanical part & electrical part of the printing machine, make sure to find out and eliminate the potential safety hazard before start up.
(2) Check if the mechanical part is clean enough, especially the components of ink sink and gloss roll; no dirt is allowed in places like printing transfer wheel, tube ejecting table, UV lamp hanger, chain rest, etc.

Power on/off

(1) Power control of the printing machine is composed of 2 parts: general power switch & sub-power switches; general power switch controls power supply to the whole printing machine, it connects to the external power network; the sub-power switches control the power supply to each operation part, by mounting in each corresponding area.
(2) When start the machine, turn on the general power switch first, then turn on power switches of each control part, finally operate the switches/keys according to relevant working part. 2.3. Before power off, stop each the work of each part, then shut off the power switch, finally turn off the general power switch.

Electrical operation principle & usage of printing machine:

(1)Operation zone 1

3.1.1. Manual operation mode:【Printing wheel jogging】&【Printing table jogging】are used for manual operation like tuning plate, replacing roller and cleaning, etc.【Printing wheel jogging】is used for manual operation of printing wheel.【Printing wheel jogging】Is used for manual operation of rotation wheel.【Auto/manual】is used for interlock and manual/jogging operation mode of the whole machine, please select different position in accordance with different usage.
3.1.2 Auto mode: full interlock state: When 【Printing wheel jogging】&【Printing table jogging】is in “OFF” mode and 【Auto/manual】is in “ON” mode, press【Start】to put the machine into full interlock working state. Let the machine to run in the setting low speed to finish the search, and then let the chain contraposition and start up normally after searching; if the chain can’t start up normally after searching, please check if the photoelectric switch above the chain works or not, or if the host machine speed regulator works(except manual mode all other modes have search process), press 【Stop】 to stop working. Semi-interlock mode: In the above mentioned usage, only need to turn 【Auto/manual】to manual mode, and repeat the operation as per step 1, semi-interlock will be achieved—-only glossing, no printing; the transfer printing wheel is still at the moment. About the chain: In above mentioned step 1&2 state, when 【Chain interlock】of operation zone 2 is placed in interlock state in the right position, the chain must keep moving to guarantee the normal operation of full machine interlock & semi-interlock state, otherwise it would only keep searching process but not able to start up (refer to operation zone 2 for more detail) Press【Emergency stop】key in any circumstance,the machine will stop in soonest time.
3.2 Operation zone 2:

3.2.1 Power supply: 【Control start】&【Control stop】are power supply switches of the second control circuit of the printing table. Press【Control start】key to turn on the power supply before start up the machine, so as to guarantee both operation zone 2 & 1 work normally. Please turn on this control power before turning on the UV lamp, in order to guarantee the PLC communication go well.【Inverter power】is the power switch for the 2 inverters in this operation zone; the first one from the left is for axes (abrasive wheel) motor, the second one is for gloss wheel motor. Must turn on the inverter power before turn on 【Axes start】& 【Gloss start】, otherwise the axes motor and gloss wheel motor can not work. Restart 【Axes start】&【Gloss start】can eliminate start-up disorder problem.
3.2.2.Chain mode:【Chain interlock】switch controls free movement and interlock state of the chain. Turn it to the left side to shut down the interlock state when the machine is in tuned plate state, the chain movement state doesn’t affect tuned plate state. the machine is in normal full interlock or semi-interlock state, 【Chain interlock】key shall be placed to the right as interlock state, also make sure the chain is working, so that normal operation of operation zone 1 can be achieved. When the machine stops, the chain will go back to free moving state.
3.2.3. Speed setting: Speed regulation of axes motor inverter and glossing inverter is adjusted by the rotary button (regulation resistance) on the inverter control panel; 【Host machine speed regulation】key is used for speed setting during full interlock or semi-interlock state; before start up, contrarotate the regulation resistance to the minimum speed, then accelerate during start up to the target printing speed. 【Chain speed regulation】is for speed setting during chain free movement; when the machine is in interlock state, it doesn’t work; when the printing machine is in standby state waiting for unloading tubes, please adjust the chain speed to be same as the one during printing machine operation, so as to prevent tube deformation due to overheat in dryer.
3.3. Operation zone 3:
Data information display:
3.3.1 Ammeter, thermal meter, indicator light are used for displaying data information of each corresponding function.
3.3.2 Human-machine interface displays the operation of each data information & function(refer to human-machine interface operation manual of printing machine for details )

3.4. Operation zone 4:

The printing machine can print up to 5~6 colors (as per customer’s inquiry); operation setting of each ink sink independent; there are manual stop and auto control functions; during normal operation, put the toggle switch to auto position, to set the on/off time of time relay, and operation speed of the ink motor by adjusting the setting of regulation resistance, so as to find the best printing time. Auto control can only be achieved when the printing wheel is in operation state, when printing machine stops, all ink motors is also in still state. When convert the switch to manual position, the machine will be in manual tuning state, this operation can start without any control. Put the switch to “stop position when the relative ink sink is not used.

Printer Header Pictures

Oven Pictures & Spare Parts


We are factory located in Shanghai China, welcome to visit our team.

1. Normally 30% deposite payment, balance 70% before shipment.

2. We can provide L/C for special country.

1. For some simple machine, we will install before shipment, no need to do complicate install on customer side.

2. For complicate machine, our engineer is available for going customer side, but the visa fee, round flight ticket, hotel and food are undertaken by customer. Besides, engineer compensation 100USD/Day. Engineer can provide installation services, and also available to teach your operator how to use it.

1. Talk with our sales about your product size and applications, capacity you need per minute, For example 50 pcs/minute. we will provide the right mode for you.

2. Place Order and do the first Payment.
3. Produce and send video for your green light.
4. You do the final Payment
5. Arrange shipment
6. Receive goods.

Yes, we have team to answer your questions and provide technical services China time 8:00AM to 17:00PM. But Please take detail video for the problems you have so that our technical person get well know and provide to you the solutions.

You can cancel order, but the 30% deposit will not return.

Contact Us to Buy

Printer for Sale:

Glass Cement 6 Color Hard Tube Printing Machine

GREAT FEATURE Glass Cement Hard Tube 6 Color Printing Machine Applications– Sample of Offset Printer for sale Description: The glass cement hard tube 6 color printing machine is an offset printing machine for fully plastic hard…

The Printer Header

Soft tube, hard tube The Printer Header of the 6 Color Soft Tube Printing Machine Applications– Sample of Offset Printer for sale Description: The header of the 6 color soft tube printing machine is produced by…

PE tube Six Color Rotating Printer for Sale Price

GREAT FEATURE PE tube 6 Six Color Rotating Printer Applications– Sample of Offset Printer for sale Description: Detailed Product Descriptionfor PE tube 6 Six Color Rotating Printer Quick DetailsType: Offset Printer Condition: New Plate Type: Screen…

Dry Oven of 6 Color Printing Machine

GREAT FEATURE Best Dry Oven of 6 Color Printing Machine for Sale Offset Printing Machine Manufacturer We have 1-8 color offset printing machine for soft tube and hard tube. Soft tube used for cosmetic tube, hard…

Commercial Offset Printer

Soft tube, hard tube Best Commercial Offset Printer for sale Price Applications– Sample of Offset Printer for sale Offset Printer for sale Video Offset Printer for sale Description: The Commercial Offset Printer is an Offset Printer…

1-8 color Offset Printing Machine

soft tube , hard tube 1-8 color Offset Printing Machine Applications– Sample of Products Video Description: An 8 color offset printing machine is a highly advanced piece of equipment used for commercial printing. As a manufacturer,…

Tube Making Machine:

Automatic filling and sealing machine

Automatic filling and sealing machine: We have many different model of Automatic filling and sealing machine for sale. We can also customize the whole production line including the grinding machine, mixing machine, drying machine,…

6 Color Printing Machine

6 color offset printing for Sale: Hs code: 8443139000 can be used for soft tube, cosmetic tube, hard tube, glass cement, bottle, cup, lip gloss, bottle and so on. It’s application is very wide…

Tube Filling and Sealing Machine

Soft tube Price: USD12,600 Applications– Sample of Products Tube Filling and Sealing Machine Manufacturer We have 1-8 color offset printing machine for soft tube and hard tube. Soft tube used for cosmetic tube, hard…

Related Post:

What is offset printing?

What is offset printing? Offset printing is a kind of lithography, it is very simple to say that offset printing is the use of rubber (rubber blanket) to transfer the graphic on the plate…

Which is better offset or screen printing?

Which is better offset or screen printing? The choice of offset printing or screen printing depends on the specific printing needs and application scenarios. Offset printing is suitable for printing ordinary color rich, colorful…

Similar Posts